Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
1. Grasp and gently pull the rear of the passenger side rear corner trim panel in order to disengage the retaining clips.
2. Remove the passenger side rear corner trim panel from the vehicle.
3. Inspect the passenger side rear corner trim panel for broken or missing retaining clips. Replace the clips as needed.
Installation Procedure
1. Install the passenger side rear corner trim panel to the vehicle.
2. Align the tabs at the front of the passenger side rear corner trim panel.
3. Press the passenger side rear corner trim panel at the rear in order to engage the retaining clips.
Body Side Front Garnish Molding Replacement - Left Side
Body Side Front Garnish Molding Replacement - Left Side
Removal Procedure
1. Pull out on the center pillar garnish (1,2) molding to disengage the clips.
2. Remove the center pillar garnish molding.
Installation Procedure
