Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
Seat Back: Service and Repair
Front Seat Back Hinge and Recliner Mechanism Replacement
Front Seat Back Hinge and Recliner Mechanism Replacement
Removal Procedure
The front seat back recliner mechanism is mounted to the inboard side of the seat.
1. Remove the seat from the vehicle.
2. If removing the recliner mechanism remove the seat back recliner handle. Refer to Driver Seat Recliner Handle and Passenger Seat Recliner
Handle Replacement.
3. Remove the seat cushion cover enough to access the bolts that retain the hinge or recliner mechanism (6) to the seat cushion frame.
4. Remove the seat back cover enough to access the bolts (2, 8) that retain the hinge or recliner mechanism to the seat back.
5. Remove the bolts (2, 8) that retain the hinge/recliner mechanism to the seat back frame.
6. Remove the bolts (3, 7) that retain the hinge/recliner mechanism to the seat cushion frame.
7. Remove the hinge/recliner mechanism from the seat assembly.
Installation Procedure
1. Position the hinge/recliner mechanism (6) to the seat assembly.
Notice: Refer to Fastener Notice.
2. Install the bolts (2,8) to retain the hinge/recliner mechanism (6) to the seat back frame.
Tighten the bolts to 32 N.m (24 lb ft).
