Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
3. Remove the seat cushion cover enough to access the bolts that retain the hinge or recliner mechanism (6) to the seat cushion frame.
4. Remove the seat back cover enough to access the bolts (2, 8) that retain the hinge or recliner mechanism to the seat back.
5. Remove the bolts (2, 8) that retain the hinge/recliner mechanism to the seat back frame.
6. Remove the bolts (3, 7) that retain the hinge/recliner mechanism to the seat cushion frame.
7. Remove the hinge/recliner mechanism from the seat assembly.
Installation Procedure
1. Position the hinge/recliner mechanism (6) to the seat assembly.
Notice: Refer to Fastener Notice.
2. Install the bolts (2,8) to retain the hinge/recliner mechanism (6) to the seat back frame.
Tighten the bolts to 32 N.m (24 lb ft).
3. Install the bolts (3,7) to retain the hinge/recliner mechanism (6) to the seat cushion frame.
Tighten the bolts to 32 N.m (24 lb ft).
4. Install the front seat back cover.
5. Install the front seat cushion cover.
6. Install the seat back recliner handle if recliner mechanism was removed.
7. Install the seat to the vehicle.
Rear Seat Back Cushion Cover and Pad Replacement
Rear Seat Back Cushion Cover and Pad Replacement
