Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
Seat Cushion: Service and Repair
Front Seat Cushion Cover and Pad Replacement
Front Seat Cushion Cover and Pad Replacement
Removal Procedure
1. If equipped with a power seat adjuster, raise the seat to the full up position.
2. Remove the front seat from the vehicle.
3. Remove the seat back cover enough to expose the recliner mechanism bolts (2, 7).
4. Remove the recliner bolts (2, 7).
5. Remove the seat back (1) from the seat assembly.
6. Remove the seat cushion from the seat adjuster assembly (4).
1. Remove the recliner handle.
2. Remove the power seat adjuster switch, if equipped.
3. Remove the bolts securing the seat cushion frame (3) to the adjuster assembly (4).
7. Release the seat cushion J channel retainers from the seat cushion frame.
8. Release the hook and loop strips that retain the seat cushion cover (1) to the seat cushion pad (2).
9. Remove the seat cushion cover from the foam pad.
10. Remove the foam pad (2) from the cushion frame (3).
Caution: Replace the passenger presence system as a complete assembly to prevent possible injury to the occupant. All the components in
the service kit are assembled and calibrated as a unit. Using only some of the components in the service kit will cause the passenger
presence system to operate improperly.
