Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
presence system to operate improperly.
6. If replacing the front passenger seat cushion pad, you must also replace the inflatable restraint passenger presence system. Refer to Inflatable
Restraint Passenger Presence System Replacement - Front.
Installation Procedure
1. Position the power seat switch bracket (2) to the seat cushion frame, if equipped.
Notice: Refer to Fastener Notice.
2. Install the screws (3) to retain the power seat switch bracket.
Tighten the screws to 2 N.m (18 lb in).
3. Install the bolts (4) retaining the seat cushion frame to the adjuster.
4. Install the bolts (4) to retain the seat cushion frame to the adjuster.
Tighten the screws to 25 N.m (18 lb ft).
