Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
Installation Procedure
1. If you are reusing the check strap seal, apply weatherstrip adhesive to the check strap seal. Use GM Weatherstrip Adhesive GM P/N 12345097
(Canadian P/N 10953479), or the equivalent.
2. Install the side rear door check strap seal to the door.
Rear Door Opening Weatherstrip Replacement
Rear Door Opening Weatherstrip Replacement
Removal Procedure
1. Remove the rear corner garnish molding.
2. Remove the driver side body side rear trim panel.
3. Remove the passenger side rear corner trim panel.
4. Remove the rear floor trim plate.
5. Remove the rear door opening frame garnish molding.
6. Pull the rear door opening weatherstrip from the door opening pinch-weld flange. Use 3M Release Agent or the equivalent at the bottom ends of
the rear door opening weatherstrip if needed.
Installation Procedure
1. Apply weatherstrip adhesive into the channel on the rear door opening weatherstrip. Use GM P/N 12345097 (Canadian P/N 10953479) or the
