Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
11. Crimp the inlet hose (4) from the master cylinder to the PCP (2) to prevent fluid from leaking out and draining the master cylinder reservoir.
Important: The area around the PCP MUST be free from loose dirt to prevent contamination of disassembled ABS components.
12. Remove the inlet hose clamp (3) from the PCP assembly (2) inlet port.
13. Remove the inlet hose (4) from the PCP assembly (2) inlet port.
Important: For installation, the PCP mounting bracket top bolt is longer than the mounting bracket side bolts.
14. Remove the PCP mounting bracket top bolt (1) and mounting bracket side bolts (3).
15. Remove the PCP assembly (2) from the vehicle.
Installation Procedure
