Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
11. Remove the 2 brake caliper mounting bolts.
Caution: Do not depress the brake pedal with the brake rotors/calipers and/or the brake drums removed. Damage to the brake system
may result. If brake system damage occurs and is not repaired, vehicle damage and/or personal injury or death may result.
12. Remove the brake caliper from the brake caliper mounting bracket.
Installation Procedure
1. Install the brake caliper to the brake caliper mounting bracket.
2. Perform the following procedure before installing the caliper mounting bolts.
1. Remove all traces of the original adhesive patch.
2. Clean the threads of the bolt with brake parts cleaner or the equivalent and allow to dry.
3. Apply Threadlocker GM P/N 12345493 (Canadian P/N 10953488) to the threads of the bolt.
Notice: Refer to Fastener Notice.
3. Install the 2 brake caliper mounting bolts.
Tighten the bolts to 108 N.m (80 lb ft).
4. Remove the rubber cap or plug from the exposed brake hose fitting end.
Important: Install 2 new copper brake hose gaskets.
5. Assemble the 2 new copper brake hose gaskets and the brake hose to caliper bolt to the brake hose.
