Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
10. Remove the brake pads from the brake caliper mounting bracket.
11. Remove the anti-rattle clips from the brake caliper mounting bracket.
Installation Procedure
1. Install the anti-rattle clips to the brake caliper mounting bracket.
2. Install the brake pads to the brake caliper mounting bracket.
3. Install the brake caliper to the brake caliper mounting bracket.
4. Install the brake caliper mounting bolts to the brake caliper mounting bracket. Do not tighten.
5. Install the brake caliper and brake caliper mounting bracket (1) as an assembly.
6. Perform the following procedure before installing the brake caliper mounting bracket bolts.
1. Remove all traces of the original adhesive patch.
2. Clean the threads of the bolt with denatured alcohol or equivalent and allow to dry.
3. Apply Threadlocker GM P/N 12345493 (Canadian P/N 10953488) to the threads of the bolt.
Notice: Refer to Fastener Notice.
7. Install the brake caliper mounting bracket bolts (2).
Tighten the brake caliper mounting bracket bolts to 165 N.m (123 lb ft).
8. Tighten the brake caliper mounting bolts (2).
Tighten the brake caliper mounting bolts to 108 N.m (80 lb ft).
