Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Brake Pressure Modulator Valve Replacement (W/O JL4)
Brake Pressure Modulator Valve Replacement (w/o JL4)
Removal Procedure
Caution: Refer to Brake Fluid Irritant Caution.
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice.
Important: The area around the electric hydraulic control unit (EHCU) MUST be free from loose dirt to prevent contamination of
disassembled ABS components.
1. Thoroughly wash all contaminants from around the EHCU.
2. For cutaway vehicles, remove the splash shield.
3. For AWD vehicles, remove the torsion bar.
4. Disconnect the electrical harness connectors from the electronic brake control module (EBCM).
Important: Make sure that brake lines are tagged and kept in order for proper reassembly.
5. Disconnect the brake lines from the brake pressure modulator valve (BPMV).
6. Remove the bolts securing the EHCU mounting bracket to the frame rail.
7. Remove the EHCU from the vehicle.
