gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Procedures|Page 14887 > < Procedures|Page 14885
Page 7
background image

5. For cutaway vehicles only, install the cable to the mounting bracket until the locking tabs snap into place.
6. Connect cable at the equalizer.
7. Remove the safety stands.
8. Lower the vehicle.

9. Enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling.

10. Adjust the park brake cable. Refer to Park Brake Adjustment.

Parking Brake Rear Cable Replacement - Right Side

Parking Brake Rear Cable Replacement - Right Side

Removal Procedure

1. Release the park brake.
2. Disable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling.
3. Raise and support the vehicle. Refer to Vehicle Lifting.

Procedures|Page 14887 > < Procedures|Page 14885