gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Procedures|Page 14888 > < Procedures|Page 14886
Page 8
background image

4. Disconnect the cable from the equalizer.
5. For cargo and passenger vehicles, remove the cable from the rear crossmember by depressing the locking tabs.
6. For cutaway vehicles, remove the cable from the mounting bracket by depressing the locking tabs.
7. Pass the cable through the cable guide.

8. Disconnect the rear axle vent hose clip from the cable (1500 Series).

9. Gently open the rear axle clip.

Procedures|Page 14888 > < Procedures|Page 14886