gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Wheel Speed Sensor Replacement (2WD)|Page 15018 > < Wheel Speed Sensor Replacement (2WD)|Page 15016
Page 3
background image

Notice: Refer to Fastener Notice.

5. Install the WSS mounting bolt.

Tighten the WSS mounting bolt to 18 N.m (13 lb ft).

6. Install the WSS cable mounting clip to the knuckle.
7. Install the WSS cable mounting clip to the upper control arm.
8. Install the WSS cable mounting clip to the frame attachment point.
9. Connect the WSS cable electrical connector.

Wheel Speed Sensor Replacement (2WD)|Page 15018 > < Wheel Speed Sensor Replacement (2WD)|Page 15016