Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
Coolant Reservoir: Service and Repair
Radiator Vent Inlet Hose Replacement
Radiator Vent Inlet Hose Replacement
Removal Procedure
1. Drain the coolant from the reservoir.
2. Remove the coolant recovery reservoir.
3. Remove the vent hose from the throttle body.
4. Remove the vent hose from the radiator.
5. Remove the vent hose (1) from the vehicle.
Installation Procedure
1. Install the vent hose (1) to the vehicle.
2. Connect the vent hose to the radiator.
3. Connect the vent hose to the throttle body.
4. Install the coolant recovery reservoir.
5. Fill the reservoir with coolant.