Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
Heater Hose: Service and Repair
Heater Inlet Hose Replacement (6.6L)
Heater Inlet Hose Replacement (6.6L)
Tools Required
J 38185 Hose Clamp Pliers
Removal Procedure
1. Remove the air cleaner assembly.
2. Drain the engine coolant. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac N Fill).
3. Remove the upper fan shroud.
4. Remove the accumulator.
5. Reposition the heater inlet hose (2) clamp to the coolant bypass valve.
6. Remove the heater inlet hose (2) from the coolant bypass valve.