Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Engine Coolant Temperature Sensor Replacement
Removal Procedure
Notice: Use care when handling the coolant sensor. Damage to the coolant sensor will affect the operation of the fuel control system.
1. Remove the intake manifold tube.
2. Drain the coolant to a level below the engine coolant temperature (ECT) sensor. Refer to Draining and Filling Cooling System (Static Fill)
Draining and Filling Cooling System (Vac N Fill).
3. Disconnect the engine wiring harness electrical connector(s) (1) from the appropriate ECT sensor (s).
4. Remove the appropriate ECT sensor(s) (1).
Installation Procedure
