Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
7. Position the engine wiring harness.
8. Position the main connector bracket to the generator bracket.
9. Install the main connector bracket bolts.
Tighten the bolts to 10 N.m (89 lb in).
10. Connect the right side main engine harness connector.
11. Position the injector return line.
12. Install the fuel injector return line clip (1) to the injector.
13. Install the fuel injector return line fitting (2) to the injector.
14. Perform the above 2 steps for the other 3 fuel injectors.
