Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
9. Position the injector return line to the injectors.
10. Install the fuel injector return line clip (1) to the injector.
11. Install the fuel injector return line fitting (2) to the injector.
12. Perform the above 2 steps for the other 3 fuel injectors.
13. Position the engine wiring harness.
14. Install the glow plug wire harness retaining bolts at the lower part of the left upper valve cover.
15. Install the connector bracket bolts (1).
Tighten the bolts to 10 N.m (89 lb in).
16. Install the wiring harness clip to the main connector bracket.
17. Connect the left side main engine harness electrical connector.
