Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
11. Position the injector return line.
12. Install the fuel injector return line clip (1) to the injector.
13. Install the fuel injector return line fitting (2) to the injector.
14. Perform the above 2 steps for the other 3 fuel injectors.
15. Install the fuel rail pressure sensor electrical connector bracket to the stud.
16. Install the bracket bolt and nut.
Tighten the bolt/nut to 10 N.m (89 lb in).
