Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
Notice: Label all the injector electrical connectors before the connectors are removed in order to prevent reconnecting to the wrong injector.
Failure to properly connect the injectors in the correct sequence will cause severe engine damage.
12. Disconnect the engine harness electrical connectors from the fuel injectors.
13. Remove the fuel injector return line clip (1) from the injector.
14. Remove the fuel injector return line fitting (2) from the injector.
15. Perform the above 2 steps for the other 3 fuel injectors.
16. Reposition the injector return line out of the way.
17. Disconnect the right side main engine harness connector.
