Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
7. Position the A/C compressor.
8. Install the A/C compressor bolts.
Tighten the bolts to 50 N.m (37 lb ft).
9. Connect the engine harness electrical connectors to the A/C compressor.
10. Install the auxiliary generator idler pulley, if equipped.
Tighten the bolt to 50 N.m (37 lb ft).
11. Install the auxiliary generator bracket bolt and bracket, if equipped.
Tighten the bolt to 50 N.m (37 lb ft).
12. Install the auxiliary generator, if equipped.
13. Install the drive belt.