Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
1. Apply a 2-3 mm (1/8 in) wide, by 0.5-1.5 mm (1/16 in) high bead of sealant to the intake manifold. Refer to Sealers, Adhesives, and Lubricants.
2. Install the intake manifold.
3. Install the intake manifold bolts/nuts.
Left Side
Notice: Refer to Fastener Notice.
4. Tighten the intake manifold bolts/nuts.
