Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
4. Tighten the intake manifold bolts/nuts.
Tighten the bolts/nuts in the sequence shown to 25 N.m (18 lb ft).
5. Install the fuel injector pump.
6. Install the left fuel rail. Refer to Fuel Injection Fuel Rail Assembly Replacement - Bank 2.
7. Install the auxiliary generator, if equipped.
8. Install the center intake manifold.
Intake Manifold Replacement - Right Side (LLY, LBZ)
Intake Manifold Replacement - Right Side (LLY, LBZ)
Removal Procedure
1. Remove the center intake manifold.
2. Remove the right fuel rail. Refer to Fuel Injection Fuel Rail Assembly Replacement - Bank 1.
3. Remove the intake manifold bolts/nuts.
Important: The intake manifold uses sealer. Pry at the area by the fuel rail bolt holes in order to avoid damage to the sealing surfaces.
4. Remove the intake manifold.
5. To prevent entry of debris in the cylinder head tape the openings.
Installation Procedure