Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
16. Position the positive battery cable boot.
17. Install the front intake manifold tube nut.
Tighten the bolt to 15 N.m (11 lb ft).
18. Connect the engine harness electrical connector (3) to the intake air valve.
19. Connect the engine harness electrical connector (2) to the IAH.
20. Connect the engine harness electrical connector (1) to the MAP sensor.
21. Install the engine cover.
22. Install the air cleaner outlet duct.
23. Connect the negative battery cable.
