Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
1. Apply sealant to the threads of the oil pressure sensor, if necessary. Refer to Sealers, Adhesives, and Lubricants for the correct part number.
Notice: Refer to Fastener Notice.
2. Using the J 41712, install the oil pressure sensor (1).
Tighten the sensor to 30 N.m (22 lb ft).
3. Connect the engine harness electrical connector (2) to the oil pressure sensor.
4. Lower the vehicle.
5. Check and add engine oil, if necessary.
