Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
5. Position the turbocharger exhaust heat shield.
6. Install the 3 turbocharger exhaust heat shield bolts.
Tighten the turbocharger exhaust heat shield bolts to 8 N.m (71 lb in).
7. Install the turbocharger heat shield.
8. Install the 3 turbocharger heat shield bolts.
Tighten the turbocharger heat shield bolts to 9 N.m (80 lb in).
9. Position the transmission fill tube and install the transmission fill tube to bell housing nut.
Tighten the transmission fill tube to bell housing nut to 18 N.m (13 lb ft).
10. Install the engine cover.
Turbocharger Exhaust Pipe Replacement (6.6L (LMM))
Turbocharger Exhaust Pipe Replacement (6.6L (LMM))
Removal Procedure
