Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
Dashboard / Instrument Panel: Service and Repair
Driver Knee Bolster Bracket Replacement
Driver Knee Bolster Bracket Replacement
Removal Procedure
Caution: Refer to Restraint System Service Precautions.
1. Remove the knee bolster trim panel.
2. Remove the nuts (2) securing the knee bolster (1) to the knee bolster brackets.
3. Remove the knee bolster (1).
4. Remove the nuts (1) securing the inner and outer knee bolster brackets (2) to the instrument panel (I/P).
5. Remove the knee bolster brackets (2).
Installation Procedure
1. Align the inner and outer knee bolster brackets (2) to the I/P.
Notice: Refer to Fastener Notice.
2. Install the nuts (1).
Tighten the nuts to 10 N.m (88 lb in).
