Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
8. Remove the drain pan from under the vehicle.
Power Brake Booster Outlet Hose Replacement
Power Brake Booster Outlet Hose Replacement
Removal Procedure
Notice: Refer to Power Steering Hose Disconnected Notice .
1. Install a drain pan under the vehicle.
2. Siphon the power steering fluid from the reservoir to prevent excessive spillage.
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
4. Through the wheel well, disconnect the power brake booster outlet hose (1) from the power steering gear (2).
5. Lower the vehicle.
6. Remove the water deflector from the fender.
7. Remove the power brake booster outlet hose (1) from the power brake booster (2).
8. Remove the power brake booster outlet hose from the vehicle.
Installation Procedure
Notice: Refer to Installing Hoses Without Twists or Bends Notice .
1. Route the hose in the same position the hose occupied prior to removal.
Notice: Refer to Fastener Notice .
