Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
10. Loosen the clamp on the radiator outlet hose to engine.
11. Remove the radiator outlet hose from the engine.
12. Remove the radiator outlet hose from the vehicle.
Installation Procedure
Important: Lubricate the inside diameters of the hoses with clean coolant prior to installation.
1. Install the radiator outlet hose to the engine.
Notice: Refer to Component Fastener Tightening Notice.
2. Tighten the clamp on the radiator outlet hose to engine.
Tighten the clamp to 5 N.m (44 lb in).
