Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
4. Position the PCV pipe to the left valve cover and loosely install the PCV pipe bolt.
Notice: Refer to Fastener Notice.
5. Tighten the right and left PCV pipe bolts.
Tighten the PCV pipe bolts to 18 N.m (13 lb ft).
6. Position the glow plug wiring harness to the original position and install the wiring harness bracket bolt.
7. Connect the wiring harness connector to the glow plug module.
8. Install the charged air cooler inlet pipe to the turbocharger.
9. Install the air cleaner outlet duct.
10. Install the engine cover.
