Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
Installation Procedure
Notice: Refer to Fastener Notice.
1. Position the fuel rail assembly and install the 2 bolts.
Tighten the bolts to 25 N.m (18 lb ft).
2. Connect the right fuel rail feed pipe fitting to the fuel rail.
Tighten the fittings to 41 N.m (30 lb ft).
3. Connect the fuel rail pressure (FRP) sensor electrical connector (1).
4. Install the right fuel injector feed pipes.
5. Install the EGR valve and bracket.
6. Prime the fuel system. Refer to Fuel System Priming.
