Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
Installation Procedure
Notice: Refer to Fastener Notice.
1. Position the fuel rail assembly and install the 2 bolts.
Tighten the bolts to 25 N.m (18 lb ft).
2. Connect the FRT sensor electrical connector.
3. Install the left fuel injector feed pipes.
4. Install the right fuel rail fuel feed pipe
5. Install the left fuel rail fuel feed pipe.
6. Install the A/C compressor.
7. Prime the fuel system. Refer to Fuel System Priming.
8. Start the engine.
If the engine does not start, repeat the above step.
