gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Seat Belts|Page 17251 > < Seat Belts|Page 17249
Page 2
background image

Notice: Before the shaft is rotated, remove the inflatable restraint coil assembly from the steering column and allow it to hang freely. Failure to do
so may damage the coil assembly.

*

Visually inspect the steering shaft for sheared injected plastic (1). If the steering shaft shows sheared plastic, replace the steering shaft.

*

Any frame damage that could cause a bent steering shaft must have the steering shaft runout checked. Using a dial indicator at the lower end of the
steering shaft, rotate the steering wheel. The runout must not exceed 1.60 mm (0.06 in).

Seat Belts|Page 17251 > < Seat Belts|Page 17249