Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
Center Link: Service and Repair
Relay Rod Replacement
Tools Required
*
J 24319-B Steering Linkage and Tie Rod Puller
*
J 43631 Ball Joint Remover
*
J 34028 Inner Tie Rod Wrench
Removal Procedure
1. Raise and suitable support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Loosen the inner tie rods to relay rod retaining nuts using J 34028 .
3. Remove the inner tie rods to the relay rod retaining nuts.
4. Rotate the steering linkage to remove the inner tie rods from the relay rod.
