Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
Front Steering Knuckle: Service and Repair
Steering Knuckle Replacement (RWD)
Tools Required
*
J 24319-B Steering Linkage and Tie Rod Puller
*
J 43631 Ball Joint Remover
*
J 45851 Ball Joint Separator Protector Adapters
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tire and wheel.
3. Remove the wheel hub and bearing.
4. Remove the outer tie rod to steering knuckle retaining nut.
5. Disconnect the outer tie rod from the steering knuckle using J 24319-B .
6. Remove the brake hose bracket retaining bolt from the steering knuckle.
