Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
32. Install the turn signal and multifunction switch assembly onto the steering column tilt head assembly.
Caution: Refer to SIR Inflator Module Coil Caution .
Important: Rest the electrical contact of the turn signal and multifunction switch assembly on the turn signal cancel cam assembly.
33. Screw the 2 pan head tapping screws into the turn signal and multifunction switch assembly.
Tighten the screws to 1 N.m (9 lb in).
34. Install the tilt spring only.
35. Install the ignition lock cylinder case.
36. Install the ignition lock cylinder.
37. Install the shift lever assembly.
38. Enable the SIR system. Refer to SIR Disabling and Enabling .
