Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
14. Remove the steering shaft assembly (1) from the steering column support assembly (2) and the steering column jacket assembly (3).
15. Remove the 4 TORX(R) head screws (1) from the support assembly (2).
16. Discard the 4 TORX(R) head screws (1).
17. Remove the support assembly (2) from the jacket assembly (3).
Installation Procedure
Notice: Refer to Fastener Notice .
1. Attach the steering column support assembly (2) to the steering column jacket assembly (3) with the 4 TORX(R) head screws (1).
Tighten the screws to 17 N.m (13 lb ft).
