Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
Control Arm: Service and Repair
Lower Control Arm Replacement
Lower Control Arm Replacement (RWD)
Tools Required
*
J 43631 Ball Joint Remover
*
J 45851 Ball Joint Separator Protector Adapters
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tire and wheel.
3. Remove the front coil spring.
4. Remove the lower ball joint retaining nut.
5. Disconnect the lower ball joint from the steering knuckle using J 43631 and J 45851 .
6. Remove the lower control arm.
Installation Procedure
1. Install the lower control arm.
2. Connect the lower ball joint to the steering knuckle.
Notice: Refer to Fastener Notice .
3. Install the lower ball joint retaining nut.