Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
Band Apply Servo: Service and Repair
4L80-E/4L85-E - Automatic Transmission
Reverse Servo Replacement
Reverse Servo Replacement
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the transmission oil pan and filter.
3. Remove the rear servo assembly from the transmission case as follows:
*
Cover bolts (6)
*
Cover (5)
*
Cover gasket (4)
*
Bottom retaining clip (3)
*
Servo piston (2)
*
Outer ring oil seal (1)
*
Inner ring oil seal (7)
*
Accumulator piston (8)
*
Piston seal (9)
*
Washer (10)
*
Servo spring (11)
*
Servo spring retainer (12)
*
Selective pin (13)
*
Accumulator spring (14)
Installation Procedure
1. Install the rear servo assembly to the transmission case as follows:
*
Accumulator spring (14)
*
Selective pin (13)
*
Servo spring retainer (12)
*
Servo spring (11)
*
Washer (10)
*
Piston seal (9)
