Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
12. Install the rubber grommet to the floor panel.
Important: Ensure the shift lever is in the Park position.
13. Install the shift cable to the steering column shift control.
14. Install the clip securing the shift cable to the steering column bracket.
15. Install the cable to the shift lever ball stud.
16. Adjust the shift cable. Refer to Range Selector Lever Cable Adjustment .
17. Install the knee bolster bracket.
18. Install the knee bolster trim panel.
Automatic Transmission Range Selector Lever Cable Bracket Replacement
Automatic Transmission Range Selector Lever Cable Bracket Replacement
Removal Procedure
1. Apply the parking brake.
2. Shift the transmission into neutral.
3. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
4. Disconnect the transmission range selector cable from the shift lever and the bracket (2).
5. Remove the bolts (1) securing the transmission range selector cable bracket (2) to the transmission.
6. Remove the transmission range selector cable bracket from the vehicle.
Installation Procedure
