gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Rear Axle Lubricant Level Inspection (8.6 Inch Axle)|Page 13914 > < Rear Axle Lubricant Level Inspection (8.6 Inch Axle)
Page 1
background image

Fluid - Differential: Service and Repair
Rear Axle Lubricant Level Inspection (9.75 Inch, 10.5 Inch Axles)

Rear Axle Lubricant Level Inspection (9.75 Inch, 10.5 Inch Axles)

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Ensure the vehicle is level.
3. Inspect the rear axle for leaks. Repair as necessary.
4. Clean the area around the rear axle fill plug.

5. Remove the rear axle fill plug.
6. Inspect the lubricant level.

The lubricant level should be between 0-6 mm (0-0.25 in) below the fill plug opening.

7. If the level is low, add lubricant until the level is even with the bottom edge of the fill plug opening. Use the proper fluid. Refer to Fluid and

Lubricant Recommendations .

Notice: Refer to Fastener Notice .

8. Install the rear axle fill plug.

Tighten the rear axle fill plug to 33 N.m (24 lb ft).

9. Lower the vehicle.

Rear Axle Lubricant Level Inspection (8.6 Inch Axle)|Page 13914 > < Rear Axle Lubricant Level Inspection (8.6 Inch Axle)