Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
19. If the rotating torque measurement is below 1.0 N.m (10 lb in) for used bearings, or 1.7 N.m (15 lb in) for new bearings, continue to tighten the
pinion nut.
Tighten the pinion nut, in small increments, as needed, until the torque required in order to rotate the pinion is between 1.0-2.3 N.m
(10-20 lb in) for used bearings, or 1.7-3.4 N.m (15-30 lb in) for new bearings.
20. Once the specified torque is obtained, rotate the pinion several times to ensure the bearings have seated.
Recheck the rotating torque and adjust if necessary.
21. Install the differential assembly.
22. Fill the axle with the proper axle lubricant. Refer to Rear Axle Lubricant Replacement (8.6 Inch Axle) Rear Axle Lubricant Replacement (9.75
Inch, 10.5 Inch Axles) .
23. Lower the vehicle.
