Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
7. Remove the bolts (1) and the yoke retainers (2) from the rear axle pinion yoke (4).
8. Disconnect the propeller shaft (3) from the rear axle pinion yoke (4).
9. Remove the propeller shaft by sliding it rearward from the transmission.
Installation Procedure
1. Install the propeller shaft to the transmission.
2. Connect the propeller shaft (3) to the rear axle pinion yoke (4).
Notice: Refer to Fastener Notice .
