Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
19. Connect the internal wiring harness electrical connectors to the following components:
*
The transmission fluid pressure manual valve position switch (1)
*
The 1-2 shift solenoid (2)
*
The 2-3 shift solenoid (3)
*
The pressure control solenoid (4)
*
The TCC PWM solenoid (5)
*
The 3-2 shift solenoid (6)
20. Install the transmission oil pan and filter.
21. Lower the vehicle.
22. Fill the transmission to the proper level with DEXRON(R) VI transmission fluid. Refer to Transmission Fluid Check .
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to
relearn TAP values. Transmission performance may be affected as new TAP values are learned.
23. Reset the TAP values. Refer to Transmission Adaptive Functions .
