Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
Windshield Washer Pump: Service and Repair
WASHER PUMP REPLACEMENT
REMOVAL PROCEDURE
1. Open and support the hood.
2. Remove the upper fender support.
3. Remove the bolt from the washer solvent container.
4. Lift the washer solvent container up enough past the horns in order to access the washer hose and the electrical connector.
5. Disconnect the electrical connector from the washer pump.
6. Disconnect the washer hose from the washer pump.
7. Place a cap on the washer pump to prevent any washer solvent loss.
8. Remove the washer solvent container from the vehicle.
9. Drain the washer solvent into a suitable container.
10. Remove the washer pump from the washer solvent container.
11. Remove the washer solvent container cap.
INSTALLATION PROCEDURE
1. Install the new washer pump into the washer solvent container.
2. Install the washer solvent container cap.
