Savana 4500 V8-6.6L DSL Turbo (2009)
1. Install the front door rear garnish molding to the vehicle.
2. Align the retainers on the front door rear garnish molding with the slots in the door.
3. Push on the molding in order to engage the retainers.
Front Side Door Trim Panel Replacement
Front Side Door Trim Panel Replacement
Special Tools
J 38778 Door Trim Pad and Garnish Clip Remover
Removal Procedure
1. Remove the front door garnish molding. Refer to Front Side Door Front Garnish Molding Replacement (See: ).
2. Remove the front door trim plate. Refer to Front Door Trim Plate Replacement (See: ).
3. Remove the armrest (3). Refer to Armrest Replacement (See: Interior Moulding / Trim/Arm Rest/Service and Repair).
4. Remove the door trim panel screws (2), located behind the armrest.
5. Use the J 38778 to disengage the retainers around the outside edges of the door trim panel (1).
6. Slide the door trim panel (1) upwards to release the door panel from the door.
7. Remove the front door panel (1) from the vehicle.
Installation Procedure
