gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Front Door Trim Plate Replacement|Page 11138 > < Front Door Trim Plate Replacement|Page 11136
Page 6
background image

1. Install the door trim panel (1), by hooking the top of the door trim panel (1) to the door belt line.
2. Align the door trim panel retainers to the door.
3. Push towards the door to engage the retainers to the sheet metal.

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

4. Install the door trim panel screws (2) and tighten to 2.0 Nm (18 lb in).
5. Install the armrest (3). Refer to Armrest Replacement   (See: Interior Moulding / Trim/Arm Rest/Service and Repair).
6. Install the front door trim plate. Refer to Front Door Trim Plate Replacement   (See: ).
7. Install the front door garnish molding. Refer to Front Side Door Front Garnish Molding Replacement   (See: ).

Front Side Door Water Deflector Replacement

Front Side Door Water Deflector Replacement

Removal Procedure

1. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement   (See: ).
2. Remove the front door water deflector from the front door inner panel.
3. Remove the gasket from the inside door handle if equipped.
4. Pull the electrical connectors through the slit in the door handle cut out.

Installation Procedure

Front Door Trim Plate Replacement|Page 11138 > < Front Door Trim Plate Replacement|Page 11136