Savana 4500 V8-6.6L DSL Turbo (2009)
5. Gently pull the door opening weatherstrip from the door opening pinch-weld flange.
6. Remove the door opening weatherstrip from the vehicle.
Installation Procedure
1. Apply GM P/N 12345097 (Canadian P/N 10953479) or the equivalent, into the channel on the weatherstrip.
2. Install the weatherstrip to the vehicle.
3. Start at the corners in order to align the door opening weatherstrip to the door opening pinch-weld flange. When pressing the weatherstrip on to the
pinch-weld flange ensure that the weatherstrip does not pull away at the corners.
4. Starting with the corners of the door opening, press the weatherstrip on to the door opening pinch-weld flange.
5. Install the front door stepwell mat. Refer to Front Floor Mat/Carpet Replacement (See: Interior Moulding / Trim/Carpet/Service and Repair).
6. Install the front door lower pillar garnish molding. Refer to Lower Pillar Garnish Molding Replacement (See: Interior Moulding / Trim/Trim
