Savana 4500 V8-6.6L DSL Turbo (2009)
Rear Side Door Garnish Molding Replacement
Rear Side Door Garnish Molding Replacement
Removal Procedure
1. Grasp the sliding side door upper trim panel.
Pull on the panel in order to disengage the retaining clips.
2. Inspect the sliding side door upper trim panel for broken or missing clips.
Replace the clips if needed.
Installation Procedure
1. Install the sliding side door upper trim panel to the vehicle.
2. Align the tabs on the trim panel with the retainers on the door.
Press the trim panel into place.
Rear Side Door Upper Track Garnish Molding Replacement
Rear Side Door Upper Track Garnish Molding Replacement
Removal Procedure
1. Remove the center pillar upper garnish molding. Refer to Center Pillar Upper Garnish Molding Replacement - Right Side (See: Interior
