Savana 4500 V8-6.6L DSL Turbo (2009)
Moulding / Trim/Trim Panel/Service and Repair).
2. Remove the right roof side rail garnish molding. Refer to Roof Side Rail Garnish Molding Replacement - Right Side (See: Interior Moulding /
Trim/Trim Panel/Service and Repair).
3. Grasp and gently pull down on the sliding side door upper track garnish in order to disengage the retaining clips.
4. Remove the sliding side door upper track garnish from the vehicle.
5. Inspect the sliding side door upper track garnish for broken or missing retaining clips. Replace the retaining clips as needed.
Installation Procedure
1. Install the sliding side door upper track garnish to the vehicle.
2. Align the sliding side door upper track garnish into position.
3. Press the garnish in order to engage the retaining clips.
4. Install the right roof side rail garnish molding. Refer to Roof Side Rail Garnish Molding Replacement - Right Side (See: Interior Moulding /
Trim/Trim Panel/Service and Repair).
5. Install the center pillar upper garnish molding. Refer to Center Pillar Upper Garnish Molding Replacement - Right Side (See: Interior Moulding /
Trim/Trim Panel/Service and Repair).
Rear Side 60/40 Door Trim Panel Replacement - Left Side (E26, 40 Door)
Rear Side 60/40 Door Trim Panel Replacement - Left Side (E26, 40 Door)
Special Tools
J 38778 Door Trim Pad and Garnish Clip Remover
Removal Procedure
